Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Timing Belt Replacement

Model: Kia Rio DC, MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005
Part: Timing belt

See other generations:
Video tutorial

Open the front bonnet and remove the plastic cover protecting the timing belt. Check for wear: if cracks are visible, it is essential to replace it. Lift the vehicle on suitable axle stands, remove the front right wheel and the inner plastic cover to access the crankshaft pulley, which must be removed by disconnecting the auxiliary belt that drives the water pump and alternator.

To easily access the timing belt removal, you also need to remove the engine side support. Now rotate the crankshaft pulley to align the timing marks before removing the belt (remove the spark plugs to reduce compression and facilitate this operation).

Once the timing marks are aligned, loosen the tensioner and remove the timing belt without moving the pulleys. Install the new roller, tensioner, and new belt, ensuring it is correctly tensioned.

Reassemble everything (it is advisable to also replace the auxiliary belt) in reverse order.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Timing Belt of the Kia Rio
Guide to Replacing the Timing Belt of the Kia Rio
Kia Rio (2000-2005 / DC, MK 1) In this guide, we will see the instructions that will allow us to disassemble and replace the timing belt of the Kia Rio. First, let's open the hood …
Replacement of Timing Belt
Replacement of Timing Belt
Kia Rio (2005-2011 / MK 2, DE) This video shows you how to replace your timing belt. First, lift the car on a jack or axle stands and remove the front right wheel to gain better ac…
How to Replace the Timing Belt on a Kia Rio
How to Replace the Timing Belt on a Kia Rio
Kia Rio (2005-2011 / MK 2, DE) Learn how to replace the timing belt on a Kia Rio. Open the bonnet and lift it, securing it with the provided rod. Disconnect the power wiring using …

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos