Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Position of Sensors and Actuators in the Kia Rio MK4

Model: Kia Rio YB, MK 4, SC - Years 2016-2023
Part: Checks and maintenance

In this video, see where various sensors and actuators are located in the Kia Rio MK4: The TPS (Throttle Position Sensor) is connected to the throttle body and indicates to the ECU how much the driver presses the pedal. Next to it is the MAP (Manifold Absolute Pressure) sensor, which is a pressure sensor located at the level of the intake manifold. On either side of the engine block, there are two variable valve solenoid sensors for improved oil flow. Then we have the oxygen sensors. Next to them are the two lambda probes and the CMP sensor, which is the camshaft position sensor, detecting the speed and position of the crankshaft. The YouTuber shows us, from the wire colours on the actuator, that this is a semi-sequential injection vehicle, receiving two injections for every two revolutions of the crankshaft. The ECU (the main control unit) is then shown. Very hidden, we can glimpse the coolant temperature sensor.

Updated on 2 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure warning light on the Kia RIO
How to reset the tire pressure warning light on the Kia RIO
Kia Rio (2016-2023 / YB, MK 4, SC) Today we will see the procedure to reset the tire pressure warning light of the Kia RIO; before performing the reset of the TPMS sensors, it is neces…
How to deactivate the passenger airbag in the KIA Rio?
How to deactivate the passenger airbag in the KIA Rio?
Kia Rio (2016-2023 / YB, MK 4, SC) In this tutorial, we can see how to deactivate the passenger airbag in the KIA Rio, an extremely simple and quick operation, to be carried out necess…
How to reset the TPMS of the Kia RIO
How to reset the TPMS of the Kia RIO
Kia Rio (2016-2023 / YB, MK 4, SC) These short and simple instructions will show us how to reset the tire pressure warning light of the Kia RIO; before resetting the TPMS sensors, it i…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos