Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting Dual Zone Air Conditioning on Lancia Ypsilon

Model: Lancia Ypsilon 843, MK 2, Ypsilon 2, Y2 - Years 2003-2011
Part: Warning light – error code

Turn on the instrument panel (not the engine) by turning the ignition key. Then, within forty seconds, press the "auto" and "mono" buttons simultaneously, holding them down during the countdown that will appear on the dual zone air conditioning display. It will emit a sound, and you can release the buttons. You will also hear the air mixing motors calibrating. If the number "00" appears on the right side of the climate screen after several seconds, the procedure was successful; if "01" appears, you will need to repeat it.

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Radio from a Lancia Ypsilon
How to Remove the Radio from a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) Before you can begin, sit in the driver's seat of your Lancia Ypsilon. Start by inserting the appropriate extraction keys into the four holes on the …
How to Replace the Air Filter of the Lancia Ypsilon?
How to Replace the Air Filter of the Lancia Ypsilon?
Lancia Ypsilon (2011-2023 / MK 3, Y3, Ypsilon 3, 846) To replace the air filter of the Lancia Ypsilon, open the bonnet to unscrew the first three screws securing the end housing of the air filter. Then, …
How to Replace the Air Filter on a Lancia Ypsilon
How to Replace the Air Filter on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) How to replace the engine air filter on a Lancia Ypsilon? Follow these steps: open the car door, pull up the engine compartment release lever located…

Other guides you may be interested in

    Frequently Asked Questions

    • Ypsilon 2011-2023 - How to reset the service in the Lancia Ypsilon? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos