Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on the Lancia Musa

Model: Lancia Musa MK 1 - Years 2004-2012
Part: Service warning light

This guide shows how to reset the service reminder on the Lancia Musa. First, sit in the driver's seat and close all the doors. Then, repeatedly press the system selection button until the highlighted "trip" appears on the multifunction display. Press the button again until the kilometres appear on the multifunction display. Next, press and hold the call acceptance button while simultaneously pressing the "OK" button for five seconds. Using the menu scroll button, navigate to the "ASSYST PLUS" tab, then to the "FULL SERVICE" tab, and press the "OK" button. Press the return button to close the menu. Turn off the ignition and turn it back on; also start the engine and check that the operation has been completed correctly.

Updated on 18 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Lancia Musa (2004-2012 / MK 1) Before you can start, sit in the front passenger seat of your Lancia Musa. Begin by removing the glove compartment by unscrewing the relevant fixing …
Lancia Musa (2004-2012 / MK 1) In this video tutorial, you can see how to reset the service light on a Lancia Musa by following a few simple steps that will guide you towards prope…
Lancia Musa (2004-2012 / MK 1) In this video we see the problem of a Lancia Musa with a mixed petrol and LPG system, where the engine light only comes on if the car is fueled with …

Other guides you may be interested in

    Frequently Asked Questions

    • Musa 2004-2012 - How to turn off the service warning light on Lancia Musa? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos