Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset the Service Light on a Lancia Musa.

Model: Lancia Musa MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Warning light – error code

Video tutorial

In this video tutorial, you can see how to reset the service light on a Lancia Musa by following a few simple steps that will guide you towards proper management of your car without needing a qualified technician. First, carry out a service on your vehicle, such as changing the filters and engine oil. If the light remains on, get into your car, close all the doors, and keep the ignition off; then press and hold the 000 kilometre button located at the centre of the display above the steering wheel; hold it for about 10 seconds; at this point, the spanner light should disappear.

Reset completed.


Updated on 15 June 2026 by ScegliAuto


Related tutorials

How to Remove the Cabin Air Filter from a Lancia Musa
How to Remove the Cabin Air Filter from a Lancia Musa
Lancia Musa (2004-2012 / MK 1) Before you can start, sit in the front passenger seat of your Lancia Musa. Begin by removing the glove compartment by unscrewing the relevant fixing …
Resetting the Service Light on a Lancia Musa
Resetting the Service Light on a Lancia Musa
Lancia Musa (2004-2012 / MK 1) The video shows how to reset the service light on a Lancia Musa (2004-2009). It is a very simple operation that you can do yourself. First, turn the …
Replacing Front Headlamp Bulb in Lancia Musa
Replacing Front Headlamp Bulb in Lancia Musa
Lancia Musa (2004-2012 / MK 1) In this tutorial, you will see the main steps to remove the position bulb from a Lancia Musa. First, open the bonnet and use a screwdriver to remove …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos