Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lancia
    3. :
  3. Ypsilon
    4. : How to replace the rear light bulb on the Lancia Ypsilon?

Lancia Ypsilon - Video tutorial

Model: Lancia Ypsilon Y2, 843, Ypsilon 2, MK 2 - Years 2003-2011
Part: Light bulb
Operation: How to replace the rear light bulb on the Lancia Ypsilon?

To replace the rear light bulb on the Lancia Ypsilon, open the tailgate and loosen the two fixing screws which are immediately next to the light unit. After loosening the screws and disconnecting the connectors at the rear of the headlight, it will be possible to remove it from its housing. By removing the cover of the rear part of the light unit, it will be possible to have access to the bulbs which can then be replaced. Once the new bulbs have been inserted, it will be possible to close the optical unit and install it back in its housing.


Posted on 4 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Ypsilon 2011-2023 - What does the yellow warning light with a bulb in the Lancia Ypsilon mean? Read Answer
    • Ypsilon 2011-2023 - How to replace the parking light bulb in the Lancia Ypsilon? Read Answer
    • Ypsilon 2011-2023 - How do you replace the position lights on the Lancia Ypsilon? Read Answer
    • Ypsilon 2011-2023 - What bulbs does the Lancia Ypsilon fit? Read Answer
    • Ypsilon 2003-2011 - How to replace the position light bulb on the Lancia Ypsilon? Read Answer
    • Ypsilon 2011-2023 - Which bulbs to use for the position lights of the Lancia Ypsilon? Read Answer
    • Ypsilon 2011-2023 - How do you replace the position lights on the Lancia Ypsilon? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos