Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs on the Lancia Delta?

Model: Lancia Delta MK 1 - Years: 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990
Part: Spark plugs

See other generations:
Video tutorial

To replace the spark plugs on the Lancia Delta, open the bonnet to access the engine bay. The spark plugs are located in the recess formed between the upper and lower parts of the engine. Before removing them, disconnect the coils; once the coils are disconnected, you can extract the spark plugs from their housings using a socket wrench of the correct size.

After removing the old spark plugs, insert the new spare parts and reconnect them to the coils. Finally, close the bonnet and check the correct operation of the parts.


Updated on 20 May 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Light from a Lancia Delta
How to Remove the Rear Light from a Lancia Delta
Lancia Delta (2008-2014 / MK 3) Before you start, exit the cabin of your Lancia Delta and head to the lower rear side of the vehicle. Begin by unclipping and removing the rear light…
How to Remove the Clutch Pump from the Lancia Delta
How to Remove the Clutch Pump from the Lancia Delta
Lancia Delta (2008-2014 / MK 3) In this guide, we will cover all the instructions needed to remove and replace the clutch pump or slave cylinder of the Lancia Delta. The clutch pump…
Replacing the Radiator Fluid on a Lancia Delta
Lancia Delta (2008-2014 / MK 3) Replacing the radiator fluid on a Lancia Delta? Lift the car to access the drain plug for the radiator fluid. Open the radiator hose and drain the ru…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos