Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lancia
    3. :
  3. Ypsilon
    4. : How to replace the front emblem on the Lancia Ypsilon.

Lancia Ypsilon - Video tutorial

Model: Lancia Ypsilon MK 2, 843, Ypsilon 2, Y2 - Years 2003-2011
Part: Manufacturer's coat of arms
Operation: How to replace the front emblem on the Lancia Ypsilon.

In today's video, we will see how to disassemble and replace the front logo on the second series of the Lancia Ypsilon. This operation proves to be very useful, as these emblems often fade and become particularly unsightly as a result. We proceed by opening the front engine hood and removing the grille from its housing, extracting it from its slots and consequently removing the fasteners. Once this is done, we can remove the old logo by heating the adhesive. We clean the area and proceed to install the new unit with the adhesive.


Posted on 19 July 2023 by ScegliAuto



How to replace the key battery of a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / MK 2, 843, Ypsilon 2, Y2) Let's start by disengaging and removing the "Lancia" emblem of our Lancia Ypsilon, leveraging it with a thin but resistant tool. Then, using a Philli
How to remove the handle to fold the front seat of a Lancia Ypsilon
Lancia Ypsilon (1996-2003 / MK 1, Y1, Ypsilon 1, 840) Before we can start, we will have to go and open the front door of our Lancia Ypsilon. We then begin by lowering and holding the handle down to overt
How to disassemble the car radio of a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / MK 2, 843, Ypsilon 2, Y2) Before we can begin, we will have to go and sit in the driver's seat of our Lancia Ypsilon. So let's start by inserting the special extractor keys in

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos