Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Radio in a Land Rover Freelander 2

Model: Land Rover Freelander Freelander 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Car stereo

See other generations:
Video tutorial

Let's see how to replace the radio in a Land Rover Freelander 2. Remove the front cover of the dashboard, then unscrew the screws with an appropriate screwdriver. Unscrew the screws of the plastic trim and also remove the dedicated screws.

Using a trim tool, remove the cover of the stereo (as shown in the video). Disconnect the power connectors for the dashboard buttons.

Unscrew the perimeter screws of the car stereo and pull it out of its housing. Disconnect the power cables, antenna, and fuse holder for the stereo.

For reassembly, proceed in reverse order.


Updated on 14 March 2026 by ScegliAuto


Related tutorials

How to Replace the Radio in the Land Rover Freelander?
How to Replace the Radio in the Land Rover Freelander?
Land Rover Freelander (2006-2016 / Freelander 2) To replace the radio in the Land Rover Freelander, use a tool to lever it out from its housing: once the radio is extracted, disconnect all the conne…
How to Replace the EGR Valve in a Land Rover Freelander 2
How to Replace the EGR Valve in a Land Rover Freelander 2
Land Rover Freelander (2006-2016 / Freelander 2) This video clearly describes the procedure for removing and replacing the EGR valve in a Land Rover Freelander 2. After opening the bonnet and removi…
How to Remove the Air Vents in a Land Rover Freelander 2
How to Remove the Air Vents in a Land Rover Freelander 2
Land Rover Freelander (2006-2016 / Freelander 2) This video tutorial shows how to remove the air vents in a Land Rover Freelander 2. First, remove and extract the plastic panels located at the sides…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos