Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Oil on Range Rover Discovery

Model: Land Rover Discovery L318, Discovery 2, MK 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Oil filter

See other generations:
Video tutorial

Replacing the oil filter on a Range Rover Discovery? Let's look at removing the oil filter in the engine compartment. Open the car door and pull the hood release lever, then lift the hood and secure it. Use a socket wrench to remove the bolts securing the cap where the oil filter is located.

Remove the cover, take out the worn oil filter, and install a new one. Lift the vehicle with a jack and remove the bolt from the oil pan if you need to replace the oil. Fill the engine with new oil. Reinstall the oil filter cover bolts.


Updated on 19 March 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Land Rover Discovery
How to Reset the "Service" Light on a Land Rover Discovery
Land Rover Discovery (2017-2024 / L462, MK 5, Discovery 5) Before starting, ensure that the driver door and the hood are open. Activate the instrument cluster of your Land Rover Discovery without starting the…
How to Reset the Service Light on a Land Rover Discovery
How to Reset the Service Light on a Land Rover Discovery
Land Rover Discovery (2010-2016 / MK 4, LR4, Discovery 4) In this video tutorial, learn how to reset the oil maintenance light on a Land Rover Discovery, produced from 2010 to 2016. To perform the reset, ope…
Removing the Battery in a Land Rover Discovery
Removing the Battery in a Land Rover Discovery
Land Rover Discovery (1998-2004 / L318, Discovery 2, MK 2) Removing the battery from a Land Rover Discovery? Open the hood and let's see how to remove the battery. Lift the front hood by releasing the latch w…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos