Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Discovery
    4. : Replace brake disc pads on Discovery

Land Rover Discovery - Video tutorial

Model: Land Rover Discovery Discovery 3, L319, MK 3, LR3 - Years 2004-2010
Part: Brake pads
Operation: Replace brake disc pads on Discovery

Replacing the Disc Brake Pads on a Discovery? Let's see the replacement of the left anterior disc pads. We lift the car on a column bridge to the desired height, immediately after we go to remove the rim with a telescopic wrench. We unscrew the locking pin of the brake caliper, remove the same from the caliper support. Once the brake disc is free from its caliper we go to detach the worn pads. Let's replace them with new pieces (we always mount original and compliant pieces). We mount the new pads in the brake caliper and then the same on the disc.


Posted on 13 December 2023 by ScegliAuto



How to fix the parking brake on Land Rover Discovery
Land Rover Discovery (2004-2010 / Discovery 3, L319, MK 3, LR3) If the electric parking brake on your Land Rover Discovery 3 car does not engage or is stuck and you hear clicks and noises, as shown in the video it
How do you replace the master cylinder on Land Rover Discovery?
Land Rover Discovery (1998-2004 / L318, Discovery 2, MK 2) In order to replace the Land Rover Discovery brake pump, you need to open the bonnet, so that you can access the components located inside the engine
How to reset the service in the Land Rover Discovery?
Land Rover Discovery (2010-2016 / Discovery 4, MK 4, LR4) In this tutorial we can see how to reset the service in the Land Rover Discovery 4. Before proceeding with this simple operation, we must obviously h

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos