Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Land Rover
  4. :
  5. Freelander
  6. : How to remove the starter motor on Land Rover Freelander TD4 2.0

Land Rover Freelander - Video tutorial

Model: Land Rover Freelander Freelander 1 - Years 1997-2006
Part: Starter motor
Operation: How to remove the starter motor on Land Rover Freelander TD4 2.0

In today's video we will see the main steps that will allow us to disassemble and replace the starter motor on a Land Rover Freelander TD4 2.0. First of all we open the bonnet of our car and start by removing the intake sleeve, unscrewing the screws of the clamps; we also remove the air filter box, as shown in the video. At this point we also remove the battery, unscrewing the two terminals; we find the starter motor below, we will have to unscrew the two bolts and the fixing screws; we disconnect the electrical connector to remove and replace it!


Posted on 7 February 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos