Do it yourself
| ||||
|
Land Rover Discovery - Video tutorial
Model: Land Rover Discovery
Discovery 4, MK 4, LR4
- Years 2010-2016 The guide shows you how to reset the 2016 Land Rover Discovery Sport maintenance warning light. With the driver's door and engine hood open, press the power button once to turn on only the instrument cluster. After the on-board computer diagnosis has been completed, the brake and accelerator pedals must be depressed for ten seconds. At the end of the time, release the pedals and close the door. Switch the instrument panel on again and, by pressing the? Menu? located on the steering wheel, navigate to the vehicle information tab. Select the tab relating to maintenance; this page will show when to perform the next check.
Posted on 11 March 2024 by ScegliAuto
To reset the service light of the 2017 Land Rover Discovery Sport.
Land Rover Discovery (2017-2023 / L462, MK 5, Discovery 5) If the service light on the instrument panel of your Land Rover Discovery Sport Mk5 (2017) continues to stay on despite recently having a service, do
How to reset the warning lights in Land Rover Discovery Sport
Land Rover Discovery (2017-2023 / L462, MK 5, Discovery 5) In today's video we see how to intervene to reset the oil and AdBlue warning lights in the Land Rover Discovery Sport. First of all, we proceed by ca
Resetting the service indicator light on the Land Rover Discovery 4 Sport
Land Rover Discovery (2010-2016 / Discovery 4, MK 4, LR4) In this video we can see that, once the service has been performed on the Land Rover Discovery Sport, we need to reset the system that reminds us to Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.083
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |