Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Discovery
    4. : Dashboard clock light bulb replacement

Land Rover Discovery - Video tutorial

Model: Land Rover Discovery LR3, L319, MK 3, Discovery 3 - Years 2004-2010
Part: Dashboard light
Operation: Dashboard clock light bulb replacement

In order to replace the backlight bulb of the clock present in the center console, it is necessary to remove it from its seat, together with the window lift button. Removing the watch requires some patience and familiarity since it is jammed with plastic tabs and access to release them is very limited; it is therefore necessary to use thin plastic spatulas to insert along the upper and lower edges to release the tabs and extract the watch. At this point remove the old bulb complete with bulb holder and apply the new one (bayonet coupling, use needle nose pliers). Before reassembling the clock, check that the light bulb is switched on.


Posted on 29 July 2023 by ScegliAuto



How to replace the rear light bulb on a Land Rover Discovery
Land Rover Discovery (1998-2004 / Discovery 2, MK 2, L318) Before we can begin, we will have to head to the taillight of our Land Rover Discovery. So let's start by unscrewing and removing the screws that sec
Front indicator bulb replacement
Land Rover Discovery (1998-2004 / Discovery 2, MK 2, L318) In order to replace the front indicator light bulb, it is necessary to remove the light itself: therefore open the front hood and remove the pressure
Land Rover Discovery bulb replacement
Land Rover Discovery (2010-2016 / LR4, MK 4, Discovery 4) Open the hood and put on the special support rod. For safety, work with the ignition key off, the battery disconnected and the handbrake on. Unscrew

Other guides that may interest you

How to activate the cruise control of the Nissan Qashqai

Let's see how the cruise control is activated on the Nissan Qashqai: you have to activate it by putting the cruise control switch to "on", then, using only the right spoke of the steering wheel, press the "set-" button, then the "res +" button also on the right spoke of the steering wheel and the cruise control indicator lights up on the car's instrument panel display. If the brake pedal is pressed while the cruise control is in operation or if the "cancel" button on the right spoke of the steering wheel is pressed, the cruise control will automatically deactivate and the cruise control indicator on the instrument panel will go out.

Watch the video!


by ScegliAuto

More videos