Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Turn Signal Bulb

Model: Land Rover Discovery MK 2, Discovery 2, L318 - Years 1998-2004
Part: Side marker bulb

To replace the front turn signal bulb, you need to remove the light assembly: open the hood and remove the push clips that secure the plastic cover on the grille, directly above the light assembly; at this point, you can access the mounting screw for the light located at the upper edge; once you remove the screw, pull the light forward to disengage the side push clips; now you can proceed with replacing the bulbs.

Updated on 19 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Headlight Bulb on the Land Rover Discovery
Replacing the Headlight Bulb on the Land Rover Discovery
Land Rover Discovery (2010-2016 / Discovery 4, MK 4, LR4) Next, we will see how to remove and replace the headlight bulb on the Land Rover Discovery, following the instructions below. First, open the hood of…
Replacing a Bulb on Land Rover Discovery
Replacing a Bulb on Land Rover Discovery
Land Rover Discovery (2010-2016 / Discovery 4, MK 4, LR4) Open the hood and insert the prop rod. For safety, work with the ignition key off, the battery disconnected, and the parking brake engaged. Remove th…
Replacement of the front headlight bulb of the Land Rover Discovery
Replacement of the front headlight bulb of the Land Rover Discovery
Land Rover Discovery (2017-2024 / L462, Discovery 5, MK 5) Today's procedure will show us the steps on how to disassemble and replace the headlight bulb of the Land Rover Discovery. First, we open the hood an…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos