Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Land Rover
  4. :
  5. Freelander
  6. : How to replace the rear headlight bulbs of the Land Rover Freelander

Land Rover Freelander - Video tutorial

Model: Land Rover Freelander Freelander 1 - Years 1997-2006
Part: Headlight bulb
Operation: How to replace the rear headlight bulbs of the Land Rover Freelander

The steps outlined in this guide will show us how to disassemble and replace the rear taillight and its bulbs on the Land Rover Freelander. First, let's move to the rear of the vehicle and start unscrewing the fixing screws we find on the taillight holes, using a screwdriver; gently detach the rear light and disconnect the electrical connector to remove it permanently, as shown in the video. At this point, if necessary, replace the bulbs or the entire taillight; securely fix it to the bodywork and check its operation!


Posted on 21 February 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos