Do it yourself
| ||||
|
Land Rover Discovery - Video tutorial
Model: Land Rover Discovery
L319, Discovery 3, MK 3, LR3
- Years 2004-2010 In this video we see how to change the rear light of a Land Rover Discovery III; we start by removing the two screws on the inside compared to the trunk opening, one on the bottom and one on the top. Now let's use a plastic spatula to make sure that the optical group comes off from its housing, detaching from the two plastic clips that hold it anchored. Once the headlight has detached from the body wall, all that remains is to disconnect the electrical part and release the headlight from which we can now remove the bulbs and make all the interventions we want.
Posted on 6 April 2024 by ScegliAuto
Other guides that may interest you |
Replace the steering angle sensor on the Volkswagen Golf 5When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.026
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |