Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on a Lexus RX

Model: Lexus RX Al10, MK 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Service warning light

See other generations:
Video tutorial

In this tutorial, you can observe the procedure to reset the service light of a Lexus RX car. Once inside the vehicle, turn on the instrument panel without starting the engine; set the odometer to "ODO" (not TRIP A or TRIP B), then use the ODO/TRIP button located on the dashboard below and to the right of the steering wheel; press the button until you see the total mileage.

Turn off the panel and hold down the ODO/TRIP button; turn on the panel again without releasing the button, until you see the message of reset completed on the display.

Finally, release the button and turn off and on the panel to verify that the operation was successful.


Posted on 15 August 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Lexus RX-330
How to Reset the Service Light on a Lexus RX-330
Lexus RX (2003-2008 / MK 2, Xu30) .. Today, you will learn how to reset the service light on a Lexus RX model produced from 2003 to 2008. This operation is very.. …
How to reset the service light on a Lexus RX450 H
How to reset the service light on a Lexus RX450 H
Lexus RX (2016-2022 / MK 4, Al20) The reset of the service light on a Lexus RX450 H is performed after the service. To reset the service light, you need to: - turn on the ignition by …
How to Reset the Service Light on a Lexus RX 350?
How to Reset the Service Light on a Lexus RX 350?
Lexus RX (2016-2022 / MK 4, Al20) .. In this tutorial, you will learn how to reset the service light on a Lexus RX 350, a very simple and quick operation to perform only after.. …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos