Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter in a Lincoln Nautilus

Model: Lincoln Nautilus MK 1 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Cabin air filter

Video tutorial

To replace the cabin air filter in the vehicle, follow these steps: Access the cabin from the passenger side and open the glove compartment. There are two clips on the sides of the compartment that need to be pushed outward.

Once the compartment is freed, locate the filter housing at the back, which is protected by a cover secured on the sides with two screws. After removing these two screws, you can extract the filter and replace it with a new one (always check the filter specifications for the type of vehicle).

Then, reposition the filter cover, secure the screws again, and reassemble the glove compartment.


Updated on 18 May 2026 by ScegliAuto


Related tutorials

How to replace the cabin air filter of the 2023 Lincoln Nautilus
How to replace the cabin air filter of the 2023 Lincoln Nautilus
Lincoln Nautilus (2019-2026 / MK 1) To complete the replacement of the air filter inside the cabin of your 2023 Lincoln Nautilus, you must pay attention to all the steps described in th…
Replace Engine Oil and Oil Filter on Lincoln Nautilus 2.7L V6
Replace Engine Oil and Oil Filter on Lincoln Nautilus 2.7L V6
Lincoln Nautilus (2019-2026 / MK 1) In today's tutorial, you will see the necessary instructions to perform routine maintenance by replacing the engine oil and oil filter on the Lincoln…
How to Open the Hood of the Lincoln Nautilus?
How to Open the Hood of the Lincoln Nautilus?
Lincoln Nautilus (2019-2026 / MK 1) To open the hood of the Lincoln Nautilus, go inside the cabin on the driver's side: in the lower left area near the steering column, you will find a …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos