Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Engine Oil Change Light on a Lincoln MKZ Mk2

Model: Lincoln Mkz MK 2 - Years 2013-2020
Part: Service warning light

This guide shows how to reset the engine oil change light on a Lincoln MKZ Mk2. The reset operation is performed using the buttons on the center console of the dashboard. First, turn on the instrument cluster; after initialization, press the "SETUP" button to display the confirmation message for resetting the active light. At this point, press the "RESET" button located next to the previously pressed button to reset the light. Next, reset the oil life percentage; for this operation, press the "SETUP" button again until the percentage appears. Then use the "RESET" button to restore the value. Turn off and turn on the ignition to check the correct operation of the reset.

Updated on 23 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil light on the 2015 Lincoln MKZ
How to reset the oil light on the 2015 Lincoln MKZ
Lincoln Mkz (2013-2020 / MK 2) If the engine oil light on the instrument panel of your 2015 Lincoln MKZ continues to appear even after you have already changed the oil and filter, …
How to Reset the Oil Light on the Lincoln MKZ
How to Reset the Oil Light on the Lincoln MKZ
Lincoln Mkz (2013-2020 / MK 2) In this new guide for all Lincoln MKZ (MK2) owners, you will learn how to reset the engine oil light independently and without using diagnostic tools…
How to Reset the Oil Light on a 2013 Lincoln MKZ
How to Reset the Oil Light on a 2013 Lincoln MKZ
Lincoln Mkz (2013-2020 / MK 2) The procedure to manually reset the engine oil change light on a 2013 Lincoln MKZ is very simple and takes just a few seconds to complete without dif…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos