Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of the Lincoln MKZ?

Model: Lincoln Mkz MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Door trim panel

See other generations:
Video tutorial

To remove the door panel of the Lincoln MKZ, you need to loosen the three screws that secure the panel, located at the bottom of the panel and in the inner handle area: after these screws have been loosened, you will need to pry with an object to extract the window switch from its housing, disconnecting the underlying connector.

At this point, you can completely detach the panel from the door, inserting a new one. The new panel must be secured with screws, and then the window switch must also be inserted.


Updated on 17 June 2026 by ScegliAuto


Related tutorials

How to Remove the Exterior Rearview Mirror from the Lincoln MKZ MK1
Lincoln Mkz (2006-2012 / MK 1) This guide shows how to remove the exterior rearview mirror from the Lincoln MKZ MK1. The first step is to remove the screws on the outer edge of the…
Replace the Cabin Air Filter in the Lincoln MKZ
Replace the Cabin Air Filter in the Lincoln MKZ
Lincoln Mkz (2013-2020 / MK 2) Follow the instructions below to remove and replace the cabin air filter in the Lincoln MKZ. First, open the front door on the passenger side and sta…
How to Open the Hood of the Lincoln MKZ
How to Open the Hood of the Lincoln MKZ
Lincoln Mkz (2013-2020 / MK 2) Today's steps will show you how to open the hood of the Lincoln MKZ, following the instructions below. First, open the driver's side front door and p…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos