Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Exterior Rearview Mirror from the Lincoln MKZ MK1

Model: Lincoln Mkz MK 1 - Years 2006-2012
Part: Side mirror

This guide shows how to remove the exterior rearview mirror from the Lincoln MKZ MK1. The first step is to remove the screws on the outer edge of the door panel and in the handle recess. Remove only the upper clips and those near the mirror attachment. Disconnect the electrical connector of the mirror and remove the two mounting bolts; hold the outer body of the mirror to avoid damaging the bodywork. Pull the piece out and clean the affected area. Install the new rearview mirror and tighten the bolts. Reconnect the control cable and reinstall the door panel. Check the proper operation of the mirror controls.

Updated on 4 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Headlight Bulb in the Lincoln MKZ
How to Replace the Headlight Bulb in the Lincoln MKZ
Lincoln Mkz (2006-2012 / MK 1) In today's video tutorial, you will learn how to remove and replace the headlight bulb in the Lincoln MKZ by following these simple and quick steps. …
How to Replace the Air Filter on a Lincoln MKZ?
How to Replace the Air Filter on a Lincoln MKZ?
Lincoln Mkz (2013-2020 / MK 2) To replace the air filter on a Lincoln MKZ, open the hood to access the components inside the engine compartment. The box containing the filter is lo…
How to Replace the Key Fob Battery for the Lincoln MKZ?
How to Replace the Key Fob Battery for the Lincoln MKZ?
Lincoln Mkz (2013-2020 / MK 2) To replace the key fob battery for the Lincoln MKZ, press the button located on the bottom of the device to extract the key inside the fob. After rem…

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos