Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Oil and Oil Filter on a Mahindra Quanto

Model: Mahindra Quanto MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Engine oil

Video tutorial

To replace the engine oil and oil filter on this vehicle, follow these instructions: first, open the hood and unscrew the oil fill cap. Then lift the vehicle and locate the oil drain plug from underneath the engine compartment, unscrewing it after placing a container on the floor to catch the used oil. From the top of the engine compartment, locate the oil filter and proceed to unscrew it and replace it with the new one, always ensuring to replace the gasket first.

Go back under the engine compartment and screw the oil drain plug back in. Finally, take the new lubricant, ensuring it meets the specifications compatible with the engine, and fill the system, then close the cap and check the oil level with the dipstick.


Updated on 20 May 2026 by ScegliAuto


Related tutorials

How to Remove the Cabin Air Filter in the Mahindra Quanto?
Mahindra Quanto (2012-2020 / MK 1) In this tutorial, you will see how to remove the cabin air filter in the Mahindra Quanto. This is a simple operation to perform when replacement or c…
Replacing the Alternator Belt on the Mahindra Quanto
Replacing the Alternator Belt on the Mahindra Quanto
Mahindra Quanto (2012-2020 / MK 1) Today, you will learn how to remove and replace the alternator belt on the Mahindra Quanto by following the instructions below. First, lift the vehic…
How to Replace the Timing Chain on a Mahindra Quanto?
How to Replace the Timing Chain on a Mahindra Quanto?
Mahindra Quanto (2012-2020 / MK 1) To replace the timing chain on the Mahindra Quanto, you need to remove the engine from its compartment: first, loosen the bolts that secure it to the…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos