Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maruti
    3. :
  3. Alto
    4. : 2000-2014 (RF)

Maruti Alto Years 2000-2014 (RF)

Maruti Alto (2000-2014 / RF)
How do you replace the front headlight bulb of the Maruti Alto?
In order to replace the headlight bulb of the Maruti Alto, you need to lift the hood so that the screws holding the headlight assembly from the top are …read all…
Posted on 3 April 2024 by ScegliAuto
Maruti Alto (2000-2014 / RF)
Replacement of the timing belt for the Maruti Alto.
Today we will see the main steps that will allow us to disassemble and replace the timing belt of the Maruti Alto and Suzuki Alto. First of all, we open the …read all…
Posted on 18 September 2023 by ScegliAuto
Maruti Alto (2000-2014 / RF)
How to disassemble the external rearview mirror of Maruti Alto Lx rf.
The guide shows how to replace the external rearview mirror of the Maruti Alto Lx rf. The first operation to be carried out is to remove the small triangular …read all…
Posted on 9 July 2023 by ScegliAuto
Maruti Alto (2000-2014 / RF)
How to replace wheel covers on Maruti Alto.
In this short video, we will see how to remove and replace the wheel covers of the Maruti Alto. This process is very simple and intuitive and can be applied to …read all…
Posted on 16 May 2023 by ScegliAuto
Maruti Alto (2000-2014 / RF)
How do you remove the front headlight of the Maruti Alto?
To remove the front headlight of the Maruti Alto, you need to loosen the screws that fix the front bumper of the car: these are located at the top of the …read all…
Posted on 30 April 2023 by ScegliAuto
Maruti Alto (2000-2014 / RF)
How to replace the fuel filter in Maruti Alto?
In this tutorial, we can see how to replace the fuel filter in the Maruti Alto, an extremely simple and fast operation. First of all, we open the tank cap to …read all…
Posted on 3 April 2023 by ScegliAuto
Maruti Alto (2000-2014 / RF)
How to replace the turn signal on the Maruti Alto
If we intend to personalize the car by installing amber side direction indicators, it is necessary to follow the instructions below: first remove the clips and …read all…
Posted on 2 December 2022 by ScegliAuto
Maruti Alto (2000-2014 / RF)
How to remove the rear lights in the Maruti Alto LX?
As we can see in this tutorial, removing the rear lights in the Maruti Alto LX is a very simple and quick operation. Before proceeding, make sure that the key …read all…
Posted on 5 October 2022 by ScegliAuto
Maruti Alto (2000-2014 / RF)
How to replace the Maruti Alto key battery
To correctly replace the battery inside the key of your Maruti Alto Mk1 it takes a few simple steps. In this our new mini guide we are going to find out what …read all…
Posted on 9 July 2022 by ScegliAuto
Maruti Alto (2000-2014 / RF)
How to replace the oil and oil filter of the Maruti Alto
To replace the oil and the oil filter of the Maruti Alto, we lift the car in front; we unscrew the oil filler cap, behind the oil pan, unscrew the drain plug …read all…
Posted on 6 June 2022 by ScegliAuto
Maruti Alto (2000-2014 / RF)
How to replace the cabin filter in the Maruti Alto?
In this tutorial we can see how to replace the cabin air filter in the Maruti Alto, an extremely simple and fast operation. First of all, let's position …read all…
Posted on 23 May 2022 by ScegliAuto
Maruti Alto (2000-2014 / RF)
How to mount a center console on the Maruti Alto?
If we want to install the accessory consisting of the center console to be positioned around the gear lever and its bellows, proceed as follows: access the …read all…
Posted on 4 May 2024 by ScegliAuto
Car stereo (1) Bodywork (1) Control unit (1) Wheel rim (1) Key (2) Timing belt (1) Dashboard (1) Headlight (1) Tail light (1) Fog lights (1) Air filter (1) Cabin air filter (1) Petrol filter (1) Side turn signal light bulb (1) Headlight bulb (1) Rear light bulb (1) Engine oil (2) Outside rearview mirror (1) Windscreen wipers (1)

See also:

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos