Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Maruti
  4. :
  5. Alto
  6. : How to replace the cabin filter in the Maruti Alto?

Maruti Alto - Video tutorial

Model: Maruti Alto RF - Years 2000-2014
Part: Cabin air filter
Operation: How to replace the cabin filter in the Maruti Alto?

In this tutorial we can see how to replace the cabin air filter in the Maruti Alto, an extremely simple and fast operation. First of all, let's position ourselves on the passenger seat, then open the glove compartment, unhook the lower right block and extract the drawer from the dashboard. Subsequently, in case it is the first time that the filter is replaced, we will have to cut the housing panel along the entire perimeter. Once this is done, we take out the old filter and insert the spare. We can plug the housing with a door to be purchased individually.


Posted on 23 May 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos