Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radiator in a Maruti Alto 800?

Model: Maruti Alto 800 AOD - Years 2012-2023
Part: Radiator

To replace the radiator in a Maruti Alto 800, first remove the front bumper completely to access the components behind it. To remove the bumper, loosen the screws that secure it at the top and from inside the wheel wells. Once the bumper is removed, you will have access to the radiator, which is secured in its housing by screws at the top. By unscrewing these screws and disconnecting various hoses and connectors, you can remove the old radiator and replace it with a new one.

Updated on 17 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Time the Engine of the Suzuki Alto 800 - Maruti Alto 800
How to Time the Engine of the Suzuki Alto 800 - Maruti Alto 800
Maruti Alto 800 (2012-2023 / AOD) Today's guide will show you the main steps to time the engine of the Suzuki Alto 800 and Maruti Alto 800. First, open the hood of the vehicle and rem…
How to Replace the Headlight Bulb for the Maruti Alto 800?
How to Replace the Headlight Bulb for the Maruti Alto 800?
Maruti Alto 800 (2012-2023 / AOD) To replace the headlight bulb for the Maruti Alto 800, open the hood to access the inside of the headlight corresponding to the bulb that needs to be…
How to Find the Fuse Diagrams for a Maruti Alto 800
Maruti Alto 800 (2012-2023 / AOD) The video shows the assignment diagrams for the fuses in a Maruti Alto 800. The first fuse box can be located in the engine compartment and contains …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos