Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maruti
    3. :
  3. Alto 800
    4. : How to know the fuse diagrams of a Maruti Alto 800

Maruti Alto 800 - Video tutorial

Model: Maruti Alto 800 AOD - Years 2012-2023
Operation: How to know the fuse diagrams of a Maruti Alto 800

In the video in question we are shown the assignment diagram relating to the fuses present in a Maruti Alto 800 car. The first fuse box can be located in the engine compartment of the car and contains fuses assigned to: ignition system, right light control and left, battery, fuel pump, automatic transmission, A/C compressor, radiator, etc. The second fuse box can be identified in the passenger compartment of the car and contains fuses assigned to: stop lights, audio system, door locks, horn, arrow lights, airbags, window regulators, accessory sockets, etc. To find out the specific assignment of each fuse, just consult the vehicle's use and maintenance booklet.


Posted on 2 December 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos