Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bumper on a Maruti Vitara Brezza

Model: Maruti Vitara Brezza MK 1 - Years 2016-2023
Part: Body

If you need to replace the front bumper on your vehicle, you can check out the tutorial video and read the instructions below. First, open the hood, then start unscrewing the clips and screws located above the grille. Next, disconnect the supports at the right and left ends near the fenders, and finally, remove the screws underneath where the splash shield is located. At this point, the bumper will be free, and you can pull it out after disconnecting the electrical connectors located behind.

Updated on 25 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Front Bumper on the Maruti Vitara Brezza
How to Replace the Front Bumper on the Maruti Vitara Brezza
Maruti Vitara Brezza (2016-2023 / MK 1) This guide provides instructions to remove and replace the front bumper on the Maruti Vitara Brezza. First, open the hood and start unscrewing the mo…
How to Replace the Front Wipers on a Maruti Vitara Brezza
How to Replace the Front Wipers on a Maruti Vitara Brezza
Maruti Vitara Brezza (2016-2023 / MK 1) Let's briefly review the main steps on how to remove and replace the front wipers on a Maruti Vitara Brezza. First, move to the front of your vehicle…
How to Change the Time on the Maruti Vitara Brezza
How to Change the Time on the Maruti Vitara Brezza
Maruti Vitara Brezza (2016-2023 / MK 1) Let's look at the guide below that will allow you to change the time displayed on the small screen of the instrument cluster on the Maruti Vitara Bre…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos