Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Maruti
  4. :
  5. Alto 800
  6. : How to replace a led rear light bulb on the Maruti Alto 800

Maruti Alto 800 - Video tutorial

Model: Maruti Alto 800 AOD - Years 2012-2023
Part: Rear light bulb
Operation: How to replace a led rear light bulb on the Maruti Alto 800

If we want to replace the rear light bulbs perhaps with a LED model, the description below and the video tutorial will help us on this car model. First of all it is necessary to open the rear trunk and identify the fixing screws of the optical unit which are on the inside, after having removed the screws we can extract the headlight by pulling it outwards. Behind it we will find the electrical connectors and the bulbs that we can replace one by one with an equivalent or LED model. Then proceed to reposition the headlight and tighten the fixing screws to the bodywork.


Posted on 21 June 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos