Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maruti
    3. :
  3. Baleno
    4. : How to remove the exterior rearview mirror of the Maruti Baleno Mk2

Maruti Baleno - Video tutorial

Model: Maruti Baleno MK 2 - Years 2015-2023
Part: Outside rearview mirror
Operation: How to remove the exterior rearview mirror of the Maruti Baleno Mk2

The guide shows how to replace the exterior rearview mirror of the Maruti Baleno Mk2. The first operation to carry out is to remove the internal finishing panel covering the fixing bolts of the rear view mirror. At this point, having removed the covers of the two door fixing screws, located in the compartment of the lock handle and in the compartment of the door handle, remove the door panel starting from the edges of the same. Disconnect the lock control cable and remove the panel. Remove the rearview mirror fixing bolts; keep the body outside to avoid damage to the bodywork. Replace the piece and reassemble everything in place.


Posted on 7 August 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos