Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Find the Fuse Diagrams of a Maruti Suzuki Vitara Brezza

Model: Maruti Vitara Brezza MK 1 - Years 2016-2023

The first fuse diagram shown in the video pertains to the fuse box located in the engine compartment; this box contains fuses assigned to: ignition coil, fuel pump, air compressor, ECM, radiator, ABS, starting system, brake lights, low beams, high beams, fog lights, etc. The next diagram concerns the fuse panel located in the vehicle's cabin, behind the dashboard, and contains: steering lock, power windows, sunroof, rear fog lights, horn, airbags, accessory sockets, windshield wipers, washer, interior lights, cruise control, etc.

Updated on 15 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Where Are the Fuses on the Maruti Vitara Brezza?
Where Are the Fuses on the Maruti Vitara Brezza?
Maruti Vitara Brezza (2016-2023 / MK 1) The fuse boxes on the Maruti Vitara Brezza contain the fuses that manage the operation of the devices installed in the vehicle: in this type of car, …
How to Replace the Fuel Filter in a Maruti Vitara Brezza?
How to Replace the Fuel Filter in a Maruti Vitara Brezza?
Maruti Vitara Brezza (2016-2023 / MK 1) To replace the fuel filter in a Maruti Vitara Brezza, open the hood to access the engine compartment directly under the windshield. In the center are…
How to Replace the Front Wheel on the Maruti Vitara Brezza
How to Replace the Front Wheel on the Maruti Vitara Brezza
Maruti Vitara Brezza (2016-2023 / MK 1) To replace the front wheel on the Maruti Vitara Brezza, open the rear hatch of the vehicle to access the trunk area. Under the trunk carpet, you will…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos