Do it yourself
Frequently asked questions about cars and motorcycles

Oil and Oil Filter Change for the Maruti Alto

Model: Maruti Alto AOD - Years 2012-2019
Part: Engine oil

Today, in this guide, you will find step-by-step instructions for performing routine maintenance by changing the engine oil and oil filter for the Maruti Alto. First, lift the vehicle and start unscrewing the oil drain bolt located under the engine using a socket or wrench, allowing the oil to drain into a container for about ten minutes; then use the appropriate tool to unscrew the oil filter cartridge, replacing it with a new one, as shown in the video. Now unscrew the fill cap and top off the oil!

Updated on 14 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Maruti Alto (2000-2014 / RF) To replace the oil and oil filter on a Maruti Alto, lift the front of the car. Remove the oil filler cap located behind the oil pan. Use a 17 mm wren…
Maruti Alto (2000-2014 / RF) Today, let's go through the main steps to remove and replace the timing belt on a Maruti Alto and Suzuki Alto. First, open the hood and start by remo…
Maruti Alto (2000-2014 / RF) In this tutorial, you will see how to replace the fuel filter on a Maruti Alto, a task that is extremely simple and quick. First, open the fuel tank …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos