Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Mazda CX-3

Model: Mazda Cx 3 MK 1 - Years 2015-2023
Part: Checks and maintenance

After changing the engine oil, it is necessary to reset the service maintenance light; let's see how to do it on the Mazda CX-3. First of all, get into the car and start the instrument panel; using the knob located on the central tunnel, go to the car settings until you reach the service one, then reset the service kilometers and move to the "reset" option found immediately below, as shown in the video. At this point, wait for the maintenance light to be reset on the dashboard!

Posted on 15 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service indicator on the Mazda CX-3
How to reset the service indicator on the Mazda CX-3
Mazda Cx 3 (2015-2023 / MK 1) The steps outlined in this guide will allow us to reset the service light for the regular maintenance of the engine oil change for the Mazda CX-3. Fi…
How to reset the oil service in the Mazda CX-3?
How to reset the oil service in the Mazda CX-3?
Mazda Cx 3 (2015-2023 / MK 1) In this tutorial, see how to reset the oil service in the Mazda CX-3, a very simple and quick operation to be performed only after completing the req…
How to reset the "Service" indicator on a Mazda CX-3?
How to reset the "Service" indicator on a Mazda CX-3?
Mazda Cx 3 (2015-2023 / MK 1) To reset the "Service" light on a Mazda CX-3, turn on the instrument panel without starting the engine. Use the buttons located on the center console…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos