Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Complete Removal of the Front Dashboard

Model: Mazda 6 GG, MK 1 - Years 2002-2008
Part: Dashboard

To remove the dashboard, open the glove compartment and remove the upper plastic trim. To avoid leaving marks, use a special tool or a plastic tool to also remove the trim around the steering wheel. Unscrew all the screws located under the trims. Pull up the cover of the steering column and unscrew the screws located under the instrument panel. Unscrew the screws on the sides of the dashboard under the door seals and remove the corresponding plastic clips. Unscrew the screws on the air vents and the screw located at the centre of the dashboard near the windscreen.

Updated on 8 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Instructions for Removing the Front Bumper
Instructions for Removing the Front Bumper
Mazda 6 (2002-2008 / GG, MK 1) Open the front bonnet; remove the push clips located along the edge of the bumper, specifically inside the wheel arches; then unclip those near the h…
Removal and Disassembly of the Dashboard
Removal and Disassembly of the Dashboard
Mazda 6 (2002-2008 / GG, MK 1) This video shows step by step how to completely remove and disassemble the dashboard in your car. First, start by removing all the panels and unscrew…
Instructions for Replacing the Alternator
Instructions for Replacing the Alternator
Mazda 6 (2002-2008 / GG, MK 1) Before proceeding with the alternator removal, it is advisable to disconnect the battery terminals. The alternator is located at the rear left of the…

Other guides you may be interested in

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos