Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do i replace the battery of the Mazda CX-5?

Model: Mazda CX-5 MK 1, KE - Years 2012-2017
Part: Battery

The Mazda CX-5 battery is located inside the engine compartment, in the center immediately below the windshield. In order to reach it, it will therefore be necessary to open the hood: you will have to disconnect the cables connected to the terminals in the upper part of the battery. Once the cables have been disconnected, it will be possible to loosen the fixing screws that secure the battery to its housing and remove it. The new battery can then be inserted inside its housing, connecting it to the appropriate cables and fixing it with the relative fixing bolts previously removed.

Posted on 14 December 2021 by ScegliAuto

Video tutorial

Related tutorials

How to replace the remote control battery of Mazda CX-5?
How to replace the remote control battery of Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) If the Mazda CX-5 remote control battery runs out and needs to be replaced, we can follow this short video tutorial that shows us how to proceed. To …
How to replace the rear light bulb on the Mazda CX-5?
How to replace the rear light bulb on the Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) In order to replace the rear light bulb of the Mazda CX-5, you need to open the tailgate of the luggage compartment and remove the side cover of the …
How do i replace the battery of the Mazda CX-5?
How do i replace the battery of the Mazda CX-5?
Mazda CX-5 (2017-2024 / MK 2) The replacement of the Mazda CX-5 battery is done by opening the hood in order to have access to the engine compartment: the battery will be located …

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos