Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Connect a Bluetooth Kit

Model: Mazda 6 GG, MK 1 - Years 2002-2008
Part: Accessory kit

In this guide, you will learn how to install a Bluetooth kit in a car. First, detach the plastic cover beneath the steering wheel that is clipped in place and temporarily remove part of the trim to allow the microphone wire to pass through. The microphone will eventually be positioned at the top of the driver's side A-pillar trim. Feed the wire through the plastic compartment you opened earlier. Remove the centre console and route the wire behind it. Now find a convenient spot to place the button for remote control of the Bluetooth device and connect the microphone and remote control button to the main unit of the device, which will be placed in the space behind the console. Connect the unit to the back of the car radio. Once completed, all wires will be hidden, except for the microphone and remote control. Now configure the Bluetooth connection with your smartphone, and you're done.

Updated on 9 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Kit for Modifying the Engine Air Intake
Kit for Modifying the Engine Air Intake
Mazda 6 (2002-2008 / GG, MK 1) To perform the modification, you need to obtain the complete kit. Start by disconnecting the negative terminal of the battery, then disconnect the co…
Windscreen Wiper Switch Replacement
Windscreen Wiper Switch Replacement
Mazda 6 (2002-2008 / GG, MK 1) Today, I will explain how to replace your car's windscreen wiper switch. First, gather ratchet spanners, cross screwdrivers, and interior trim remova…
Installation of accessory adapter kit for iPhone, iPod and AUX
Installation of accessory adapter kit for iPhone, iPod and AUX
Mazda 6 (2002-2008 / GG, MK 1) For this installation, you need a screwdriver and a ratchet spanner with an extension, along with the accessory kit. Start by removing the gear knob …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos