Do it yourself
Frequently asked questions about cars and motorcycles

Removal and Reinstallation of the Radio Unit

Model: Mazda CX-5 MK 1, KE - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Car stereo

See other generations:
Video tutorial

This video explains how to remove and install the radio unit from a Mazda CX-5. The operation takes no more than half an hour. First, disconnect the negative terminal of the battery.

Empty and remove the glove compartment (passenger side) by detaching the side hinges from the inside. Starting from the passenger side, unclip all the clips that secure the panel ending with the air vent grilles.

Disconnect the electrical connection at the back of the grille panel. Using your hands, detach the monitor frame which is secured by four clips, then, using a Phillips screwdriver, unscrew the three screws that hold the radio unit in place.

Extract the unit by unclipping the side clips that keep it secure. Disconnect all electrical connections at the back.

To refit the unit (either the repaired old one or a completely new one), reverse all the disassembly steps.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

Mazda CX-5 (2012-2017 / MK 1, KE) In this tutorial, we will see how to dismantle and replace the factory radio of the first generation Mazda CX-5 in simple steps. First, get into the …
Mazda CX-5 (2017-2024 / MK 2) To install the roof bars on a Mazda CX-5, use a tool to pry off the longitudinal trim pieces located at the sides of the upper section: by removing t…
Mazda CX-5 (2017-2024 / MK 2) In this guide we will see the main instructions that will allow us to install the roof racks of the Mazda CX-5. First of all, let's remove the gasket…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos