Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Brightness of the Instrument Cluster in the Mazda CX-9

Model: Mazda Cx 9 TC - Years 2016-2024
Part: Instrument cluster

In the following video, you will see the procedure to adjust the brightness of the instrument cluster in the Mazda CX-9. To do this, simply use the controls on the dashboard. This procedure is very simple, as you can see in the video. The first thing to do is to sit in the driver's seat, insert the keys, and turn the ignition. On the left side of the driver's seat, turn the knob used to adjust the headlights until you reach the instrument cluster brightness adjustment. At this point, turn the small knob located next to the tachometer to adjust the brightness to your liking.

Updated on 7 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Recalibrate the Side Windows on a Mazda CX-9?
How to Recalibrate the Side Windows on a Mazda CX-9?
Mazda Cx 9 (2007-2015 / TB) On the Mazda CX-9, one of the side windows may need recalibration, for example, after the battery has died. This is an extremely simple and quick ope…
Resetting the service light on the Mazda CX 9.
Resetting the service light on the Mazda CX 9.
Mazda Cx 9 (2007-2015 / TB) When we are about to reach the necessary mileage to carry out the service of the Mazda CX9, a warning light in the instrumentation lights up to remin…
How to reset the tire pressure light on the 2017 Mazda CX9
How to reset the tire pressure light on the 2017 Mazda CX9
Mazda Cx 9 (2016-2024 / TC) In this new guide, we will explain step by step how you can manually reset the tire pressure warning light on the instrument panel display of your 20…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos