Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. : Flair

How to Change the Engine Oil in a Mazda Flair?

Model: Mazda Flair MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Engine oil

Video tutorial

To change the engine oil in a Mazda Flair, access the underside of the vehicle, near the engine compartment: here you will find the oil drain plug, which must be opened to collect the used oil in a properly positioned container. Next to the drain plug, you will also find the oil filter, which must be unscrewed to be removed from its housing and replaced with a new one. After replacement, open the hood and top off through the designated filler in the engine compartment.


Updated on 16 July 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Oil and Oil Filter of the Mazda Bongo
How to Replace the Engine Oil and Oil Filter of the Mazda Bongo
Mazda Mazda Various Follow these main steps to carry out the routine maintenance service by replacing the engine oil and oil filter on the Mazda Bongo. First, lift the v…
How to Reset the Oil Light on the Mazda CX-50?
How to Reset the Oil Light on the Mazda CX-50?
Mazda Mazda Various To correctly complete the manual reset procedure for the oil light on your Mazda CX-50 (2024 model), follow these steps. First, get in the car and si…
How to Replace Engine Oil and Oil Filter on Mazda CX-9
How to Replace Engine Oil and Oil Filter on Mazda CX-9
Mazda Cx 9 (2016-2024 / TC) This guide explains how to perform routine maintenance by replacing the engine oil and oil filter on the Mazda CX-9. First, lift the vehicle and remo…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos