Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace a Door Panel

Model: Mazda 6 GG, MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Door trim panel

See other generations:
Video tutorial

Start by removing the plastic cover over the mirror switch contacts and disconnect the contacts. Then remove the screw near the door opening lever and take off the plastic cover.

Next, lift the window switch panel and disconnect all the contacts. Unscrew the two screws located at the bottom left.

Now gently pull the panel towards you to release all the plastic clips. Once removed, disconnect the speaker wires.

Finally, replace it with the new panel and reassemble everything in your Mazda 6.


Updated on 24 February 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel on a Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) Replace the door panel on a Mazda 6 if it is irreparably damaged. Here’s how to do it. Using a screwdriver, unscrew the screws located in the upper l…
Replace the Door Lock on the Mazda 6
Replace the Door Lock on the Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) To replace the door lock on the Mazda 6, proceed as follows: 1) Disconnect the battery. 2) Remove the entire door panel, taking care not to damage th…
How to Remove the Door Panel on Mazda 6
Mazda 6 (2002-2008 / GG, MK 1) How to remove the front passenger door panel on a Mazda 6. Follow these steps. Before starting the disassembly, disconnect the battery terminals loca…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos