|
Do it yourself
| |||
| ||||
How to Change the Engine Oil in a Mercedes-Benz C-Class?
Model: Mercedes Classe C
W204
- Years:
2007, 2008, 2009, 2010, 2011, 2012, 2013
This video is currently unavailable
To change the engine oil in a Mercedes-Benz C-Class, first park the car on a flat surface and ensure the engine is warm to aid in draining the oil. Lift the vehicle with a jack and place jack stands for safety. Once elevated, locate the oil pan under the engine. Position a container under the drain plug of the pan. Use the appropriate wrench to unscrew the drain plug and allow the oil to completely drain into the container. After the oil has finished flowing, clean the area around the drain plug and carefully reinstall it, ensuring it is tight. Finally, fill the engine with the correct amount of new oil specified in the manual, close the fill cap, and start the engine for a few minutes to check that everything functions properly and there are no leaks.
Updated on 20 October 2026 by ScegliAuto
Related tutorials
Mercedes Classe C
(2007-2013 /
W204)
.. To change the engine oil in a Mercedes C-Class, lift the vehicle to access the components under the hood. Locate the oil drain plug, which must.. …
Mercedes Classe C
(2007-2013 /
W204)
.. oil and the corresponding filter on a Mercedes C-Class. Lift the car using a column lift or jack and remove the bolt located under the oil pan with a.. …
Mercedes Classe C
(2000-2007 /
W203)
.. To replace the engine oil in a Mercedes C-Class, start by placing the vehicle on a lift or a stable work surface. Open the hood and remove the.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Reset the Tyre Pressure Warning Light in the Suzuki Swift?
To reset the tyre pressure warning light in the Suzuki Swift, turn on the ignition, then navigate through the menu using the button located on the right side: this button should be rotated to locate the options displayed. You will need to select the option indicating tyre pressure and then select the "Reset" option: this way, the sensors will read the new tyre pressure values. If the tyres have been inflated to the correct pressure, the light will turn off automatically. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.070
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |