|
Do it yourself
| |||
| ||||
Replacement of Primary and Secondary Fuel Filters
Model: Mercedes Classe E
W124
- Years 1984-1995
In addition to the original filter, a secondary filter can be installed on the fuel line to enhance filtering action. To replace the secondary filter, unscrew the two hose clamps to remove the fuel lines and completely replace the filter. For the primary filter replacement, a ratchet wrench and the replacement cartridge with the corresponding gaskets are required. Replacing the fuel filter is a simple operation that should be done frequently to maintain maximum engine performance. Unscrew the nut on top of the filter and carefully lift the cover to access the cartridge. The cartridge can be removed simply by pulling it down with some force. Disassemble the filter body and replace the cartridge after thoroughly cleaning the inside of the filter. Close the cover by replacing the rubber gasket and correctly positioning the other gaskets. Fill the filter with diesel or additive and clean up any spilled fuel to prevent fires.
Updated on 3 February 2026 by ScegliAuto
Video tutorial
Related tutorials
Mercedes Classe E
(2002-2009 /
W211)
To replace the fuel filter on a Mercedes E-Class, open the hood and remove the bolts securing the plastic cover over the engine head. Next, use a scr…
Mercedes Classe E
(1995-2002 /
W210)
If unusual smoke comes from the exhaust pipe, it is likely that the combustion of the diesel is not optimal due to injector inefficiency, which may h…
Mercedes Classe E
(2009-2016 /
W212)
This video shows how to remove and replace the engine air filter in the Mercedes E-Class 250, specifically the W212 model produced between 2009 and 2…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.128
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |