Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the steering angle sensor in a Mercedes Benz SLK55 S.K?

Model: Mercedes Slk R172, MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016
Part: Crankshaft position sensor

See other generations:
Video tutorial

So changing the steering angle sensor on your car is not exactly child's play, but it's not an impossible task either. Disconnect the battery to avoid problems with the airbag.

Then remove the steering wheel carefully removing the airbag. After removing the screws, remove the steering wheel and access the steering column lock.

The sensor is there, usually integrated into the steering column module. Disconnect the connectors, unscrew the old piece and install the new one. Reassemble everything in reverse, reconnect the battery and calibrate with a diagnostic scanner.

Without this calibration, the ESP system could have issues. Test the car and make sure everything is working.

If all this seems too difficult for you, contact an experienced workshop.


Posted on 25 March 2025 by ScegliAuto


Related tutorials

How to Replace the Key Battery on a Mercedes Benz SLK 200 R171
How to Replace the Key Battery on a Mercedes Benz SLK 200 R171
Mercedes Slk (2004-2011 / MK 2, R171) This guide shows how to replace the battery in the remote for the Mercedes Benz SLK 200 R171. The first step is to remove the emergency key by pressi…
Mass Air Flow Sensor Replacement on Mercedes SLK R170
Mass Air Flow Sensor Replacement on Mercedes SLK R170
Mercedes Slk (1997-2004 / MK 1, R170) At the beginning of the video, you can check the code for the required mass air flow sensor. To replace the part, you will need a small flat-head scr…
How to Change the Power Steering Oil on Mercedes SLK
How to Change the Power Steering Oil on Mercedes SLK
Mercedes Slk (2004-2011 / MK 2, R171) How to maintain the steering of a Mercedes SLK? Is the steering stiff when turning? Replace the power steering oil to resolve the issue and flush the…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos