Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to clean the injectors on Mercedes B-Class

Model: Mercedes Classe B MK 1, W245 - Years 2005-2011
Part: Fuel injectors

Let's see in this video how to clean the injectors on Mercedes B-Class. We lift the engine hood and put it in safety with the dipstick, then, we disconnect the power supply sleeve that brings the fuel to the injectors. We connect the manometer and the cleaning kit to the supply pipes; we begin to let the cleaning liquid present in the can flow into the injector supply pipes (we repeat the operation several times). We disconnect everything and start the engine. We reassemble the supply pipe that leads to the injectors, after having cleaned them from any traces of dirt and encrustations.

Posted on 20 July 2019 by ScegliAuto

Video tutorial

Related tutorials

How to replace the injectors of the Mercedes Class B 180 CDI
How to replace the injectors of the Mercedes Class B 180 CDI
Mercedes Classe B (2005-2011 / MK 1, W245) .. and replace the diesel injectors of the Mercedes Classe B 180 CDI. First, we open the hood of the car and start disassembling and removing the air filter.. …
Removal of the injectors of the Mercedes B-Class 2.0 L
Removal of the injectors of the Mercedes B-Class 2.0 L
Mercedes Classe B (2005-2011 / MK 1, W245) .. and replace the fuel injectors of the Mercedes B-Class 2.0 L, following the instructions below. First of all we open the bonnet and start disassembling.. …
Guide to replacing injectors in the Mercedes B-Class
Guide to replacing injectors in the Mercedes B-Class
Mercedes Classe B (2005-2011 / MK 1, W245) .. and replace the fuel injectors of the Mercedes Classe B. First, we open the hood and start disassembling and removing the air filter box, disconnecting.. …

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos