|
Do it yourself
| |||
| ||||
Replacing the Differential on a Mercedes C-Class W205: Step-by-Step Guide
Model: Mercedes Classe C
- Years:
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Video tutorial
The video shows the replacement of the rear differential on a Mercedes C-Class W205/S205, which was making noise while driving. The YouTuber lifts the car and removes the wheel, brake caliper (with the electronic brake in maintenance mode), ABS sensor, tie rods, and half-shaft. Disconnect the transmission, drain the oil, remove the old differential, and install the used one. The first replacement part was incorrect (4 arms instead of 3), then the correct one arrives. It can be easily found online, even used, at great prices. Reassemble everything, fill with 1.2 quarts of oil until it overflows, tighten the plugs, and take it for a test drive. The noise is gone.
Posted on 21 November 2026 by ScegliAuto
Related tutorials
Mercedes Classe C
(2014-2021 /
W205)
In this guide for all of you who own a Mercedes-Benz C-Class W205, we will help you step by step to easily find the fuse box located inside the cabin…
Mercedes Classe C
(2014-2021 /
W205)
.. Mercedes C-Class W205 key, follow this step-by-step guide. You only need a new CR2025 button battery. Start by taking the car key, then remove the emergency.. …
Mercedes Classe C
(2014-2021 /
W205)
This guide provides step-by-step instructions to reset the service light for routine oil change maintenance on the Mercedes C-Class W205. First, get …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Reset the Tyre Warning Light on the Hyundai I10
The tyre warning light on the instrument panel of your Hyundai I10 (third series) alerts you when there is a puncture or when the tyres are inflated to the wrong pressure. If it lights up accidentally, you can reset it manually by following these steps. Once the instrument panel is on, press the directional button located on the right side of the steering wheel and find the tyre pressure display screen. Finally, press and hold the "OK" button for a few seconds and select the "Set" option to complete the reset of the light. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.027
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |