Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Water Pump on Mercedes C

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Pump

See other generations:
Video tutorial

Removing the water pump? Let's see how to remove and replace it in the engine compartment of the Mercedes. Open and lift the hood, disconnect the engine cover, remove the air duct hose: disconnect the hose connected to the radiator using pliers (lift the car). Use a wrench to loosen the tensioner pulley and slide the belt off. Use a socket wrench to remove the tensioner pulley mounting bolt, then remove the water pump.

Install the new water pump, the tensioner, and the belt, and tighten everything with the socket wrench. Test the operation at the end of the installation.


Updated on 20 March 2026 by ScegliAuto


Related tutorials

Guide to replacing the water pump of the Mercedes Class C 1.8L
Guide to replacing the water pump of the Mercedes Class C 1.8L
Mercedes Classe C (2007-2013 / W204) The instructions in this guide will show us how to disassemble and replace the water pump of the Mercedes Class C, with a 1.8L engine code M271. To d…
How to Remove the Windshield Wiper Pump from the Mercedes C-Class
How to Remove the Windshield Wiper Pump from the Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) This guide shows how to replace the windshield wiper pump on the Mercedes Benz C-Class. To perform this operation, you need to access the left front …
Replacing the Water Pump on a Mercedes C-Class
Replacing the Water Pump on a Mercedes C-Class
Mercedes Classe C (2000-2007 / W203) Today, follow the steps to remove and replace the water pump on a Mercedes C-Class, as outlined below. First, open the hood of the vehicle and begin …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos