Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Slk
    4. : Removal of central dashboard on Mercedes SLK

Mercedes Slk - Video tutorial

Model: Mercedes Slk R172, MK 3 - Years 2011-2016
Part: Dashboard
Operation: Removal of central dashboard on Mercedes SLK

Using a plastic wedge, extract the gearshift gaiter from the base and unscrew the screws underneath. Still with the wedge, extract the large plastic that frames the gearbox itself and that goes up to the car radio. Unhook it a small part at a time, disengaging it from its seat. Disconnect the various connectors, then unscrew the four screws around the car stereo. Pull it out and disconnect the connectors. You can also remove the side bulkhead from the glove compartment, the one towards the door, and unscrew the screws underneath it. Still unscrewing the fixing screws you can remove the area behind the gear lever.


Posted on 15 January 2024 by ScegliAuto



How to disassemble and remove the central dashboard of a Mercedes Slk
Mercedes Slk (2004-2011 / MK 2, R171) Let's see how to disassemble and remove the central dashboard of a Mercedes Slk. We bring the gear knob vertically, then, with a plastic lever we rem
How to remove the instrumentation lamps on Mercedes Slk
Mercedes Slk (1997-2004 / R170, MK 1) How to disassemble the lamps of the knobs on Mercedes Slk? Not too difficult operation. Let's see how they disassemble. We open the glove box above t
Mercedes SLK central tunnel removal
Mercedes Slk (2004-2011 / MK 2, R171) In this video tutorial we will see how to disassemble the central tunnel together with the car radio of a Mercedes Slk, seeing the main steps. First

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos