Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Turn Signal Switch on a Mercedes C

Model: Mercedes Classe C W202 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Checks and maintenance

See other generations:
This video is currently unavailable

How do you remove the turn signal switch on a Mercedes C? Let's go through the disassembly of the steering wheel and components. Disconnect the battery cables located in the engine compartment.

Next, remove the screws located at the back of the steering wheel. Take out the airbag from the steering wheel along with the related power connectors.

Once the airbag is removed, unscrew the large central bolt that secures the steering wheel and pull the steering wheel towards you. Remove the fastening screws and pull the round piece located above the turn signal switch towards you, being careful not to damage it. Disassemble the turn signal switch and associated parts.

Replace the part with a new one of the same type.


Updated on 9 April 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2014-2021 / W205) This video explains what is done to your Mercedes-Benz C-Class 2203/204/205 during the A1 to A9 service intervals. Service A is the basic service: en…
Mercedes Classe C (2014-2021 / W205) To replace the battery in a Mercedes C-Class, open the hood to access the components in the engine compartment: in the upper left corner, you will fi…
Mercedes Classe C (2014-2021 / W205) Replace the auxiliary battery on a Mercedes C-Class. First, remove the passenger side mat. Disconnect the cover panel located at the bottom of the da…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light in the Suzuki Swift?

To reset the tyre pressure warning light in the Suzuki Swift, turn on the ignition, then navigate through the menu using the button located on the right side: this button should be rotated to locate the options displayed. You will need to select the option indicating tyre pressure and then select the "Reset" option: this way, the sensors will read the new tyre pressure values. If the tyres have been inflated to the correct pressure, the light will turn off automatically.

Watch the video!


by ScegliAuto

More videos