Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Steering Wheel Removal on Mercedes B-Class

Model: Mercedes Classe B MK 2, W246 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Steering wheel

See other generations:
Video tutorial

Start by removing the airbag. Look behind the steering wheel and notice the two holes containing T30 torx screws that you need to unscrew.

Unscrew the two torx screws (which will remain inside the steering wheel), and the airbag will be able to come out of its housing. Accessing the back, lift the plastic clips of the connector and disconnect them.

Now disconnect the other plug inside the steering wheel, as shown in the video, using a flathead screwdriver to pry it off. Unscrew the central bolt of the steering wheel with a 10 mm hex key. Proceed in reverse order to reassemble the steering wheel.


Updated on 9 April 2026 by ScegliAuto


Related tutorials

How to Replace the Steering Wheel Controls of a Mercedes-Benz B-Class
How to Replace the Steering Wheel Controls of a Mercedes-Benz B-Class
Mercedes Classe B (2005-2011 / MK 1, W245) .. the steering wheel controls of a Mercedes-Benz B-Class is a very simple operation. Start by disconnecting the battery terminals, first the negative and.. …
Removing the Rear Bumper of the Mercedes B-Class
Removing the Rear Bumper of the Mercedes B-Class
Mercedes Classe B (2005-2011 / MK 1, W245) .. and replacing the rear bumper of the Mercedes B-Class. First, lift the vehicle and start unscrewing and removing all screws and clips located above and.. …
How to Remove the Steering Wheel Airbag in a Mercedes Classe B?
How to Remove the Steering Wheel Airbag in a Mercedes Classe B?
Mercedes Classe B (2005-2011 / MK 1, W245) .. remove the steering wheel airbag in a Mercedes Classe B, a very simple and quick operation. Before doing this, disconnect the negative terminal of the.. …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos