Do it yourself
Frequently asked questions about cars and motorcycles

Complete Car Service Guide

Model: Mercedes Classe B MK 1, W245 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Checks and maintenance

See other generations:
Video tutorial

This guide aims to show whether you have managed to maintain the original performance of the vehicle in question after carrying out the service. The first service was performed at 19,256 miles, the second at 37,074 miles, and the third at 47,456 miles.

Over time, the vehicle has lost acceleration, its overall noise has increased, and fuel consumption has risen. A diagnosis is performed to check for any faults in memory, which shows no anomalies.

A range of products is used for the service: one for cleaning the piston rings, engine oil, an automatic transmission cleaning product, automatic transmission oil, an additive for the transmission and engine oil, a cleaner for throttle bodies and petrol injectors, a pollen filter, an automatic transmission oil filter with the corresponding oil sump gasket, an engine oil filter, and an air filter.

Once the necessary maintenance is done, a power bench test is performed again to detect any improvements achieved with the new maintenance.


Updated on 10 February 2026 by ScegliAuto


Related tutorials

Mercedes Classe B (2011-2019 / MK 2, W246) A full service is a maintenance procedure that requires several steps and the replacement and checking of various elements of the car. You can choose…
Mercedes Classe B (2005-2011 / MK 1, W245) Resetting the service light related to the maintenance interval is fully achievable independently on any Mercedes vehicle. Today, we will specificall…
Mercedes Classe B (2019-2026 / MK 3, W247) To remove the front bumper of a Mercedes-Benz B-Class, open the bonnet and locate the upper fixing screws positioned along the edge of the bumper, th…

Other guides you may be interested in

    Frequently Asked Questions

    • Classe B 2005-2011 - Where is the Mercedes B-Class yaw sensor located? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos